1-397 1-397 designed for rugged excellence industrial 6-port slim type unmanaged poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x100base-fx ips-1042fa series ? ips-1042fa series provide 4x10/100base-t(x) poe(p.s.e.) and 2x100base-fx single/multi-mode fiber ports ? supports ieee 802.3at compliant 30watts poe per port ? support auto-negotiation and auto-mdi/mdi-x ? support store and forward transmission ? support flow control ? support surge protection technology ? warning system by relay output ? slim type rigid ip-30 housing design ? din-rail and wall mounting enabled ips-1042fa series are unmanaged poe ethernet switches with 4 x 10/100base-t(x) p.s.e. and 2x100base-fx ports. ips-1042fa series supports power over ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an ethernet network. ips-1042fa series has 4x10/100base-t(x) p.s.e. (power sourcing equipment) ports. p.s.e. is a device (switch or hub for instance) that will provide power in a poe setup. ips- 1042fa series support redundant power inputs, configurable relay output alarm and rigid ip-30 housing. in addition, the wide operating temperature range from -40 to 70c can satisfy most of operating environment. introduction connections of ethernet devices ips-1042fa series poe poe poe ip camera (pd) ip camera (pd) ip camera (pd) ip camera (pd) dvr long distance transmission features v1.0 / jun, 2013 industrial ethernet switch din-rail unmanaged poe ethernet switch practical operation ips-1042fa series can be used in connecting several ethernet devices like ethernet i/o, ip-camera or other ethernet switches. in addition, there are two different power inputs at terminal block to avoid interruption caused by power down. when the primary dc power input fails, the backup power input will take over immediately to guarantee a non-stop operation. v ips-1042fa series industria l media converte r industria l device server industrial wireless access point industrial cellular vpn router industrial m2m gateway network m anagement softwar e accessorie s industria l ethernet switch
1 industrial ethernet switch www.oring-networking.com 1-398 dimensions (unit=mm) poe pin assignment 10/100base-t(x) p.s.e. rj-45 port rj-45 pin defnition pin no. description #1 td+ with poe power input + #2 td- with poe power input + #3 rd+ with poe power input - #6 rd- with poe power input - oring switch model ips-1042fa-mm-sc IPS-1042FA-SS-SC physical ports 10/100 base-t(x) ports in rj45 auto mdi/mdix with p.s.e. 4 4 fiber ports specifcations fiber ports number 2 2 fiber ports standard 100base-fx 100base-fx fiber mode multi-mode single-mode fiber diameter (m) 62.5/125 m & 50/125 m 9/125 m fiber optical connector sc sc typical distance (km) 2 km 30 km wavelength (nm) 1310 nm 1310 nm specifcations v1.0 / jun, 2013 industrial ethernet switch din-rail unmanaged poe ethernet switch
1-399 1-399 designed for rugged excellence technology ethernet standards ieee 802.3 for 10base-t ieee 802.3u for 100base-t(x) and 100base-fx ieee 802.3x for flow control ieee 802.3at poe specification mac table 2048 mac addresses processing store-and-forward led indicators power indicator green : power led x 2 fault indicator amber : indicate pwr1 or pwr2 failure 10/100base-t(x) rj45 port indicator green for port link/act. green for poe power injected. 100base-fx fiber port indicator green for port link/act. fault contact relay relay output to carry capacity of 1a at 24vdc power redundant input power dual dc inputs. 50~57vdc on 6-pin terminal block. power consumption (typ.) 6.78 watts (power consumption of p.s.e. is not included) 5.6 watts (power consumption of p.s.e. is not included) overload current protection present reverse polarity protection not present physical characteristics enclosure ip-30 dimensions (w x d x h) 26.1(w) x 94.9(d) x 144.3(h) mm (1.03 x 3.74 x 5.68 inch.) weight (g) 395 g environmental storage temperature -40 to 85c (-40 to 185f) operating temperature -40 to 70c (-40 to 158f) operating humidity 5% to 95% non-condensing regulatory approvals emi fcc part 15, cispr (en55022) class a ems en61000-4-2 (esd), en61000-4-3 (rs), en61000-4-4 (eft), en61000-4-5 (surge), en61000-4-6 (cs), en61000-4-8, en61000-4-11 shock iec60068-2-27 free fall iec60068-2-32 vibration iec60068-2-6 safety en60950-1 warranty 5 years oring switch model ips-1042fa-mm-sc IPS-1042FA-SS-SC fiber ports specifcations max. output optical power (dbm) -14 dbm -8 dbm min. output optical power (dbm) -23.5 dbm -15 dbm max. input optical power (saturation) 0 dbm 0 dbm min. input optical power(sensitivity) -31 dbm -34 dbm link budget (db) 7.5 db 19 db v1.0 / jun, 2013 industrial ethernet switch din-rail unmanaged poe ethernet switch industria l media converte r industria l device server industrial wireless access point industrial cellular vpn router industrial m2m gateway network m anagement softwar e accessorie s industria l ethernet switch
1 industrial ethernet switch www.oring-networking.com 1-400 available model model name description ips-1042fa-mm-sc industrial 6-port slim type unmanaged poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x100base-fx, multi- mode, 2km/1310nm, sc connector IPS-1042FA-SS-SC industrial 6-port slim type unmanaged poe ethernet switch with 4x10/100base-t(x) p.s.e. and 2x100base-fx, single- mode, 30km/1310nm, sc connector packing list ? ips-1042fa ? din-rail kit ? wall-mount kit ? quick installation guide optional accessories (can be purchased separately) ? dr-75-48 : 75 watts@48vdc din-rail power supply ? dr-120-48 : 120 watts@48vdc din-rail power supply ? sdr-240-48 : 240 watts@48vdc din-rail power supply ? sdr-480-48 : 480 watts@48vdc din-rail power supply ips-1 aa b cc -dd-ee ordering information code defnition 10/100base-t(x) p.s.e. port number additional port number additional port type fiber optical mode fiber optical connector option - 04: 4 ports - 2: 2 ports - fa: 100 base-fx - mm: multi-mode - ss: single-mode - sc: sc connector v1.0 / jun, 2013 industrial ethernet switch din-rail unmanaged poe ethernet switch
|
